Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 10 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports
The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
The most innovative bike taillight ever designed, Vya Pro blends ultra-powerful output with revolutionary smart features. The piercing 100 lumen beam is easily visible over an impressive distance of 2km, even in bright daylight. The Pro version builds on Vya’s innovations with a horizontal layout with custom engineered optic providing a concentrated burst of red light ideal for road riding in fast moving traffic. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. An optional seat rail mount is a great addition to the platform to get safety lighting even higher on the bike to be more in a driver’s line of sight. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya Pro is unmatched in the market for its power, compact design, and commuter convenience. Features - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - Impressive 6 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 100 (SafePulse) - Runtime: 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.
Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.
This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams
The Rojo 100 USB rechargeable bike tail light is designed to keep you safe and visible on every ride, day and night. It’s packed with up to 100 lumens of power so you’ll be sure to be noticed on your daytime rides and commutes whether you’re on the road, bike path or turning the corner downtown. Four precision engineered lighting modes let you select the perfect optimized optical output. - 2 high output Cree XB-D LEDs provide four modes for every kind of ride (Steady, Pulse, Courtesy & Superflash Turbo settings) - See the light in action here! - Tested to FL1 standards - Run times: 5 hrs (Steady – 25 lm), 10 hrs (Pulse - 50-90 lm), 12 hrs (Courtesy - 30-90 lm) and up to 15 hrs (Superflash - Turbo - 100 lm) - Provide 270° of visibility - Designed for when you ride the most…during the daytime. The Rojo 100 is engineered to be highly visible even in bright, sunny conditions - Water resistant – Don’t be worried to ride in the rain, the Rojo 100 is dust & water resistance rated to the IP66 standard - Fast recharging - 650 mAh lithium polymer battery charges in 2.5 hours with micro USB type C cable (included) - Multiple mounting options - Includes rear rack, seat post, seat stay and clip mount flexible mounting options - 48 grams
Compact, aero-post-compatible safety light with two bright LEDs. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (seven hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive rear provides up to 10 lumens and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 10 - Weight: 54g - Max Runtime: 20 hours - Recharge Time: 3 hours
MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
Pedal confidently day or night with the TigerMoth 40-Lumen Taillight attached to your rig. Keep your eyes on the road ahead while its efficient, bright red Micro-LEDs watch your back. USB-rechargeable with simple, tool-free installation and a clear casing for increased peripheral visibility. - USB-rechargeable (charging cable included) - Features both clip-style attachment and bracket for mounting on seatpost - Runtime varies from 1.5–18 hours - 7 lighting modes - Output: 40 lumens - Extra mounting brackets sold separately - Mode memory: light automatically lights up in the last mode used - Weight: 23g
The Blinder MINI. These surface-mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over 800 meters away. They come with an integrated reflector face for added safety, and come in 2 different colors. With a weight of only 18 grams, the light uses its tool-less attachment to securely connect to handlebars and frames of 22–32+mm. Designed to fit both standard and oversize handlebars and aero style seatposts. - The Blinder MINI Chippy, so called because of the Chips on Board technology used giving a panel of light. The Blinder MINI Niner, so called for its array of 9 LEDs. The Blinder MINI Dot is the ideal commuter light, perfect for both riding on well-lit roads at night and as a safety light in daylight for added visibility.
A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.
• Road bar specific bright red LED • Push-in resin body replaces bar end plug • Sold as pair. Uses single AAA batteries
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We've implemented what we call "Group Ride Mode" for cyclists who want to stay visible but not distract others in the pack. - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Solas 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord
- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs
Different light technologies for different urban riders. The MOB's have a range of weapons to beat the competition. Like 3 (rear) interchangeable straps – including one to fit aero posts. Their beams range from ultra-focused to ultra-wide so they never get caught out. And you ain’t never seen flash patterns like these before. Take a look here at more of the MOB’s unique characteristics. FEATURES LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. BEAM ANGLE : 35° BAR DIAMETERS : Fits seatposts 22-32mm+ and aero posts. INTEGRATED USB PLUG : Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously. STORAGE MODE : Light can be placed in storage mode if not used for a long time (see instructions for full details). STRAPS : Replaceable straps for tool-less attachment 100% WATERPROOF: The Blinder MOB is IP67 Tested and 100% waterproof against all elements
• A sophisticated rear light right at home on a vintage or town bike • Bright LEDs with genuine polished alloy body • Mounts to seatstay or rack braze-ons • Flashing or steady modes • Includes batteries
Page 1 of 3 Next page