Tools

Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together

- Tool for removal and installation of bottom bracket cups on Cinch cranks

• Use to remove air shaft and damper shaft • Reverse threaded • See RS1 Service Manual for instruction

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.

RockShox Glass Fiber Reinforced Nylon Non-Scratch O-Ring Pick Tools (Qty 5, for use on suspension products)

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

Bicycle tool set in practical pouch with 89mm long bits. Includes 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multicomponent Kraftform handle for fatigue-free working. - Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Lightweight and robust folding pouch with 12x89mm long bits - Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck - Rapidaptor quick-release chuck allows rapid bit change

Two tools in one. The red handle is a standard reversible ratchet. The black knob is a beam torque wrench. A complete pocket multi-tool! Grab the red handle and tighten or loosen screws and bolts all over your bike. The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. Tighten each bolt to exact torque! This is a highly accurate beam torque wrench capable of tightening from 2Nm to 10Nm. When tightening, finish by pushing on the end-knob. As you tighten, the indicator will point to the current torque. When it reaches the correct torque, stop tightening. You're done! 3X larger readout scale. Our new angled slot window offers identical simplicity and accuracy as our standard tool, but 300% the size of our Standard display makes it easier to see and use. Wallet case offers ultimate portability. Our Wallet is much more than a tool case. A thin, durable Velcro closure case with a pocket to fit ID, Credit Card or Cash fits nicely in a jersey pocket or use the slim belt-loop. Semi rigid wallet surfaces insure comfort. Pockets securely hold bits and tools. A high quality, durable tool. Prestacycle TorqRatchet is compatible with all tool bit sets from Prestacycle and all standard ¼" bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. The Patent pending Beam torque wrench hidden and protected inside the handle uses hardened alloyed steel and is rated in excess of 5000 cycles and can be re-calibrated by Prestacycle. Specifications: - 3X Larger readout than our standard tool. - Carry-along pocket Ratchet with 1/4" bits set - 2~10Nm Torque Wrench all in the same tool! - Remove and install all kinds of Bolts and Screws on your Bike. - Finish tightening by pushing the Torque Knob until the arrow reaches your torque - Patented Reversible Ratchet with thumb wheel - Heavy-duty design withstands up to 60Nm of force - Uses standard 1/4" Hex bits of all sizes - Calibrated accurate for over 5000 cycles of Torque tightening - Dimensions 5.25" x 11/16" x 7/16" (133mm x 17mm x 12mm) - Tool weight is only 68 Grams! - Wallet case - Securely hold TorqRatchet and 12 bits - Semi-rigid sides insure comfort in your pocket or Jersey - Pocket fits ID, Credit Card or Cash, and more - Slim design fits where you need it - Slim belt loop - Secure Velcro closure - 12 piece Professional Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - S2 Nickel-plated Hardened steel bits are non-marring on titanium and alloy bolts Sizes: Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX®: T10, T20,T25, T30 Screwdrivers: PH1

Compact tool set mounted to your frame! Prestacycle Fixit Sticks enables you to carry a small T-Handle tool on the Frame of your Bike. The convenient mounting bracket fits the tool between your frame and Water Bottle. Instantly take the tool off your bike and work. Prestacycle Bits included. - Dual Shafts combine to for a T-tool - Shafts carry four different Bit sizes - Mounting bracket holds tool between your frame and Bottle - Includes Prestacycle Bits Sizes: - HEX: 3mm, 4mm, 5mm - TORX®: T25

RockShox, 11.4118.032.001, Service kit, Vivid Air B1 (Requires Counter Measure tool)

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Complete tool set in your Pocket! Prestacycle Fixit Sticks Pro enables you to carry a small T-Handle tool with virtually every bit size known on Bicycles. Prestacycle Professional Bits included. Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out instead of breaking the bolt head off. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. (18) Precision hardened S2 steel Nickel-plated Professional bits in a Patented Bits Carrier. Stronger and longer lasting than any other tools made for bicycles. Since worn heads can damage bolts, these bits protect your components. Covers all major HEX sizes, Screwdriver sizes, and all the new TORX® sizes found on the latest components. - T-Handle Tool w/18 Bits in a pocket carry case - Includes full Prestacycle Professional Bits Set - Soft carrier holds tool shafts and bit in one kit - Covers virtually all sizes for Bicycles and more

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

New friction-reducing DebonAir air spring delivers the most responsive forks in RockShox history, maintaining traction in more conditions than ever before. - Allows for travel change on any 2019+ BoXXer fork

Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle

- Collar spanner, Nut wrenches and bottle opener for double barrel rear shocks

The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs. Includes the following: - 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches - T25 Torx-compatible driver - Philips #2 cross tip & flat head screwdrivers - Chain tool (5 to 12 speed compatible)* - Spoke wrenches (equivalent to SW-0 and SW-2) - Presta valve core removal tool - Disc brake rotor truing tool - Disc brake pad spreader *The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets - Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm) - Weight: 6.9 oz. (195 g) - Replaceable chain tool pin (Part #985-1)

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included - 4.64oz

An important tool for setting up Eagle derailleurs on full suspension bikes.

Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox. Features: - New and Improved - 45mm of Adjustment - XO Skeleton Design - Dual-Sided Adjustment Grid - Dual-Color Adjustment Block Specs: - Axle Size: 10mm (3/8") only - Material: 7075-T6 Aluminum - Hardware: Stainless Steel

Park’s Shop Apron protects your clothes and provides large pockets to hold frequently needed tools. It’s made of heavy-duty, 7-ounce poly/cotton twill for comfort and durability.

Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.

Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

Shorten your steerer, trim your handlebars and always make sure to measure twice with Park's Hack Saw. It features an outstandingly rigid aluminum die-cast frame with a blade tension adjuster and a superbly comfortable handle. The SAW-1 comes with one blade and accepts all 12-inch (300mm) replacement blades.

The RTP-1 combines two ride-saving tools — the MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool — into one ultra-portable package. The included tool holder securely holds both tools without adding excess weight, and can be mounted or strapped to most bike frames. The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs. The TPT-1 is a handy carry-along tool for repairing small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket. MTB-5 Includes the following: - 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches - T25 Torx-compatible driver - Philips #2 cross tip & flat head screwdrivers - Chain tool (5 to 12 speed compatible)* - Spoke wrenches (equivalent to SW-0 and SW-2) - Presta valve core removal tool - Disc brake rotor truing tool - Disc brake pad spreader *The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets - Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm) - Weight: 6.9 oz. (195 g) - Replaceable chain tool pin (Part #985-1) TPT-1 - Includes 5 vulcanized rubber plugs (refills available - part #2370K) - Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") - Weight: 79 grams (2.8 oz.) with plugs NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings: • Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose • Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS • Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm • Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire • Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes Also included: • Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing • Guide magnet — routes guide cables through the frame from the outside"

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.

These are the adaptors included with HHP-2, also available separately. Sold as a pair. The adaptors are stepped at 25.7mm, 29.7, and 32.8mm. - For replacement or retrofit to older bearing press tools - Adapts older HHPs to fit headcups for 1" and 1- 1/8" - Multi-step adapters fit most press fit cup applications

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.

The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. - T10 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

Park's AWS-8 Hex Wrench Set features Bondhus balldriver ends, which facilitate use when the tool is at an angle to the bolt. This is great for working in hard-to-reach areas, such as reaching water-bottle-cage screws. The AWS-8 has 4, 5, and 6mm wrenches, which are the most common bicycle bolt sizes. Plus, its Y shape and vinyl coating provide excellent leverage and comfort.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-4 has 1.7mm tips on bent nose blades for larger, internal snap rings. The tips open from 21mm down to 2mm (center to center).

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.

The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)

Forged and precisely machined, the high leverage LP-7 Utility Pliers include an integrated cutting blade and soft touch grips.

A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate, and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360-degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. - Compatible with 16" to 29"+ wheels (ISO/ETRTO rim sizes from 317 to 630+) - Replaceable M10 threaded tip - Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers - Length: 16.5" (420mm) - Weight: 22.75 oz. (645g)

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Specialized's MTB XC Box integrates with any SWAT compatible Specialized water bottle cage and SWAT-prepped mountain bike to hold all of the gear need to make fast trailside flat repairs. - Fits one Turbo 29er innertube, SWAT tire lever, CO2 twist head, and 25g CO2 cartridge (not included).

This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.

Turbo S Diagnosis Tool from Specialized.