Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Campagnolo EPS Front Derailleur Nut & Washer
$17.90
- EPS specific front derailleur nut and washer
Campagnolo Veloce Braze-On Front Derailleur
$45.00
Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.
Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Veloce Rear Derailleur (Medium-Cage)
$125.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
Campagnolo Veloce Rear Derailleur (Short-Cage)
$125.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
Campagnolo Super Record EPS Braze-On Front Derailleur
$735.00
Campagnolo's Super Record EPS Braze-On Front Derailleur delivers electronic precision to your front shifts. Hammer into the big ring and surge forward with a mere touch of a button, under heavy load or out of the saddle it's still as smooth as a dream. An aluminum internal cage plate and external carbon cage is powered by a servo motor to provide the incredibly quick shifting. It's versatile too, working with both standard and compact cranksets and auto-trimming to eliminate chain rub. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 127g
FSA Front Derailleur Shim
$3.99
- Correct fitment of larger 31.8Mm front derailleur to 28.6Mm seat tubes
Gusset Bachelor Chain Tensioner
$25.95
- Bargain priced tensioner for turning a geared bike into a single speed - Fixed position aluminum arm with quiet rubber sealed bearing pulley - Mounts in place of derailleur
Gusset Squire Chain Tensioner
$39.95
- Lightweight sprung-type chain tensioner replaces derailleur for running a 1-Speed drivetrain on a vertical dropout frame - Variable tension and position (Can be used on rigid frames or suspension frames with varying chain length) - Supplied with 2 springs to provide pull-Up or push-down function - Superlight CNC machined alloy body, pivot bolt and sealed bearing pulley - Steel no-jump guide cage
Interloc Racing Design Front Derailleur Braze-On Clamp
$21.90
- Adapts braze-on front derailleurs to fit on frames without braze-on mount - Hinged clamp
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
MRP Mini G2 SL Backplate
$73.50
- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP
Microshift M26 Rear Derailleur
$14.99
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Microshift R9 Front Derailleur
$22.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
Microshift R539 Front Derailleur
$25.99
Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings
SRAM X3 7-/8-Speed Rear Derailleur
$23.00
SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM X5 9-Speed Rear Derailleur
$47.00
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM X0 2x10 Front Derailleur (High-clamp, Top-pull)
$69.00
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
SRAM RED eTap Rear Derailleur
$649.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
Shimano SLX M7000-GS Rear Derailleur Cage Plate
$8.00
- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer
Shimano 105 5800 Rear Derailleur Pulley Set
$11.00
- Upper pulley has larger teeth for increased chain control
Shimano Tourney RD-A070 Rear Derailleur
$22.99
The Shimano Tourney rear derailleur offers smooth shifting with SIS and HyperGlide technologies for 7-speed drivetrains. - Maximum cog size: 28t - Total capacity: 37t
Shimano SLX 2x11 Front Derailleur
$29.99
- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g
Shimano SLX Side Swing Front Derailleur
$29.99
- Enhanced Stability, Maneuverability And Shifting Efficiency - New Side Swing Design For Large Wheel Bikes - Efficient Cable Routing For Light Shift Operation - Sophisticated Chain Guide For 2X11-Speed Fcw New Spike Construction Gears - Versatile Specification Compatible With Traditional Mounting Options - Wider Clearance For Large Wheels - Compatible With Shorter Chain Stays - 50% More Shifting Power (Outward) (Vs. Current Xt, Fd-M7020 Only) - Increased Traction Range For Long-Travel And Active Rear Suspension - Series: SLX - Swing Action: Side Swing - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 136g - Clamp diameter: 34.9 w/included shims
Shimano Claris RD-R2000 Rear Derailleur
$35.99
Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed
Shimano Deore M6025 Double Front Derailleur
$38.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
Page 1 of 3 Next page