Parts & Accessories

- Chrome plated steel strapless toe clip - Hardware included

- Genuine leather-wrapped chrome plated steel - Hardware included

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

RaceFace Chester Pedal Spindle Kit Left/Right

The Vision Light Kit is the solution to take your Geo Trekking or Geo Trekking Roc Pedals into the night. Ride with increased safety and visibility in traffic when the sun goes down thanks to the 3 different flash modes, an autonomy of over 30 hours, and the oscillating light beam created by the constant rotation of the pedals. The convenient clip system makes the kit quick and easy to install. As the Vision Light is independent from the pedal, it can be easily recharged via a simple USB cable.

Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees

- Allows a customer to replace their cleats. - Two replacement cleats in box

Replacement pin set for Race Face Atlas and Aeffect pedals.

Genuine Ritchey Pedal bearing service kit has everything needed to refresh current Ritchey WCS XC and WCS Trail mountain bike pedals. The kit includes new bushings, needle bearings, ball bearings, and seals for one pair of pedals. - Kit includes: 2 bushings, 2 needle bearings, 2 ball bearings, and 2 seals - Compatible with WCS XC / WCS Trail (silver and black version) MTN pedals

Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

Wellgo Clipless Cleats for SPD Style pedals.

- Steel toe clips with 2 gates designed for single toe straps - Sold in pairs

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals

The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw. - The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each) - SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578). - Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585). - Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).

- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair

RaceFace Chester Pedal Rebuild Kit

The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.

Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm

Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

The XPro & Xpresso cleats have been developed for the TIME XPro & Xpresso road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats) in order to optimize performance, following 3 points: security, ergonomics, and performance. The Bi-material brings more durability when walking with the cleats. These cleats are the stock cleats included with all XPro & Xpresso pedals.

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

- Allows a customer to replace their cleats. - Two replacement cleats in box

Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS

- Allows a customer to replace their cleats. - Two replacement cleats in box

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Lateral - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

Reliable and Durable 2-Bolt Cleat Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions. Features: - Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat. - Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals - Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises - Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions PREDICTABLE ENGAGEMENT With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain. USER FRIENDLY Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.