Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

SRAM MTH 746 Rear Hub
$92.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
SRAM 746 Rear Disc Hub
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
SRAM MTH 716 Front Hub
$85.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
Shimano Saint Front Hub
$100.99
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
DT Swiss 350 Road Front Hub
$79.20
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.
HALO Rear Track Hub
$84.95
- Axle/spacing: 10 x 120mm nutted - Hole: 32-hole - Weight: 304g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish - 120mm OL spacing rear hub with either double fixed flip-flop threading or fixed on one side and freewheel thread on the opposite - 130mm OL rear axle conversion sold separately
HALO Spin Doctor 6F Disc Front Hub
$99.95
Light, but strong enough for all types of riding including XC through DH - Forged, CNC machined aluminum shell, 2 sealed cartridge bearings - International Standard 6-bolt disc rotor mount - Includes endcaps to switch for 9x100mm QR, 15x100 thru-axle and 20x110mm thru-axle
Shimano Dura-Ace Track HB-7710 Low-Flange Front Hub
$140.99 - $144.99
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Chris King R45D Centerlock Front
$264.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Shimano 105 HB-R7000 Rim Brake Front Hub
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano Dura-Ace Track Hi-Flange Rear Hub
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Shimano Deore M6000 Centerlock Front Hub
$28.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm
Shimano Saint Rear Freehub (135mm)
$174.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50 - $20.00
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
DT Swiss 350 MTB 6-Bolt Front Hub
$80.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
HALO Pawl And Spring Kits
$14.95
- Replacement pawls and springs for DJD Bush Drive rear are for original DJD or DJD-Bush Drive rear hub - Replacement pawls and springs for Spin Doctor 6-Drive are compatible with all 6-Drive hubs - Replacement pawls and springs for Supa Drive are compatible with all Supa Drive hubs - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible
Sun Ringle SRC Hub
$94.99 - $199.99
Product specs: - Front hub features - 7075 t6 alloy axle - Qr or 15mm axle type - Japanese cartridge bearings - 28,32 hole count - 205g - Rear hub features - 7075 t6 alloy axle - Qr or 12x142mm axle type - Four sealed cartridge bearings - 28,32 hole count - 325g
Sturmey-Archer Dynamo 3.0 Drum Front Hub
$105.28 - $109.78
- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately
Sturmey-Archer Singlespeed Drum Brake Rear Hub
$81.90
- Threaded for singlespeed freewheel, includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately
Sturmey-Archer 3x9-Speed Disc Rear Hub
$114.86
- Internal gear 3-speed hub with HG-splined 8-10sp freehub body for use with any IS 6-bolt disc brake - 6061 aluminum hub shell with 13/32" slotted solid axle (179mm overall axle length) - Gear ratio range of 177% (33% each step) - Cassette and shifters sold separately. Special shifter setup required: internal 3sp is shifted via a standard mountain 3sp front derailleur shifter. Sturmey Archer shifters not compatible with this hub
Sturmey-Archer 7-Speed Freewheel Drum Brake Rear Hub
$79.90
- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately
Shimano Alfine Centerlock Dynamo Hub
$143.99 - $144.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$23.00
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Stan's NoTubes 3.30R/3.30RTi Freehub Body
$78.00
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
Stan's NoTubes 3.30RD/3.30RDTi 12x142mm Thru-Axle Conversion Kit
$35.00
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
HALO Freehub Body Assembly (Shimano)
$109.95
- Various HyperGlide freehub body assemblies for Halo freehubs - Shimano/SRAM 8-10-speed - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible
Shimano Deore XT M8100 Straight Pull Front Hub
$70.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
Shimano SLX M7100 Front Hub
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
DT Swiss 350 MTB Center Lock Front Hub
$94.10
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.
Page 1 of 3 Next page