Brakes/Levers/Pads

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads

- Excellent for cross, urban or touring bikes where being able to brake from the top of your drop bars is desired - Forged aluminum lever with slanted barrel adjuster and hinged clamp for easy installation - Can also be installed alone as you might do on a Track bike - Made for 26.0/25.4mm drop bars with a 24mm OD section (most road bars and track bars)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

Replacement pads for the popular Magura HS33 and HS11 brake systems. Features rim-friendly compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual - A fusion of black and salmon compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Electric- This compound is formulated specifically for the higher speeds and weights of electric bicycles. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Trials - An extreme compound for only experienced trick or trials riders needing a compound that will instantly lock the wheels.

Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Jagwire's LR1 Pro Lightweight Rotors are a stylish way to upgrade the performance on your bike. Utilizing a 2-piece construction, they feature a separate aluminum spider and stainless steel brake track. The steel braking surface delivers quiet, consistent performance while the spider helps reduce rotating weight by about 15% compared to a traditional single-piece rotor. - The high quality, durable stainless steel machined braking surface ensures consistent stopping power and superior modulation - Lightweight aluminum spider keeps weight to a minimum - Available for either Center Lock or 6-Bolt ISO hubs - NOTE: LR1 rotors are NOT compatible with brakes when the pad extends below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

SRAM's Apex Brake Caliper Set is forged from aluminum for light weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Replacement lever blade for Hayes hydraulic disc levers - Includes Reach Adjuster

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

The Shimano Metrea BR U5000 Disc Brake Caliper Flat Mount is a highlight on City & Touring bikes. - Series: Metrea U5000 - Application: Urban Sport - Brake Type: disc brake, hydraulic - Mount: flat mount - Hydraulic Fluid: Shimano mineral oil - Material: aluminium, painted, stainless steel bolt (4 mm) - Construction: 2-piece - Brake Pistons: 2 pistons (ceramic) - Brake Pads: K02S resin - Hose Connection: straight - One Way Bleeding: yes - Weight: 161g ea.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull