Parts & Accessories

The Activ Grip Trail Pads are compatible with our Trail Grip platform pedals. Built from extremely strong and durable material and designed in collaboration with outdoor specialist Vibram, they offer exceptional traction on the toughest rides. Their concave geometry is enhanced with large rubber lugs and composite studs for optimal foot stability and extreme durability to take on the challenges of any terrain.

The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.

The Vision Light Kit is the solution to take your Geo Trekking or Geo Trekking Roc Pedals into the night. Ride with increased safety and visibility in traffic when the sun goes down thanks to the 3 different flash modes, an autonomy of over 30 hours, and the oscillating light beam created by the constant rotation of the pedals. The convenient clip system makes the kit quick and easy to install. As the Vision Light is independent from the pedal, it can be easily recharged via a simple USB cable.

- Allows a customer to replace their cleats. - Two replacement cleats in box

- Allows a customer to replace their cleats. - Two replacement cleats in box

- Allows a customer to replace their cleats. - Two replacement cleats in box

- Allows a customer to replace their cleats. - Two replacement cleats in box

- Allows a customer to convert any Rally 100 or 200 product over to RK/RS/XC pedal body styles.

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch. NOTE: This product contains pedal bodies only, spindles and electronics are not included. In the box: - Left and right pedal bodies (SHIMANO SPD-SL style) - Replacement seals - 55 mm Q-factor washers - Battery doors

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.

- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Customize and optimize the shoe/pedal interface. - Refine the interface between the shoe tread and pedal body - Four (4) contact sleeves - 1mm thickness

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present

A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)

A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool

A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)