Specialized Saddles, Shoes and Gloves

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

Specialized ups the ante in the off-road seat game with the Henge Comp. Its padded nose, rounded tail and rugged Micromatrix top are all tailor-made to handle the rigors of riding the trails. What's more, the Henge uses Specialized's Body Geometry technology to minimize pressure and maximize comfort, while the carbon-reinforced shell and hollow-chromoly rails add vibration damping and lightness. And, it's available in two widths so you can find the perfect fit.

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

These comfy Body Geometry gloves are the perfect fit for future cycling stars. Body Geometry padding reduces hand numbness by relieving pressure on the ulnar nerve. Single-layer palm improves bar feel, control, and durability. Top of hand is constructed from stretchable mesh for increased breathability. Backhand cuff opens wide for easy entry and exit.

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)

Featuring a proprietary pad system designed by Dr. Kyle Bickel M.D., our Grail Long Finger gloves are ergonomically designed for the best possible fit and protection. They're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, touchscreen compatible Wiretap technology, and our acclaimed Equalizer gel padding at the palm. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - Body Geometry Equalizer pad was developed by Dr. Kyle Bickel M.D. to fill the recesses of the palm in order to create an even surface over the hand. This comes with the positive result of unrestricted blood flow, which will greatly reduce numbness and tremendously enhance overall comfort. - Tapered, slip-on cuff gives you a clean, sharp, and minimalistic construction for unrestricted comfort. - Breathable mesh upper is soft, comfortable, and made from high-stretch materials. - Soft and absorbent Microwipe thumb brushes away sweat with ease. - Compatible with conductive touchscreens.

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Our new Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Compatible with conductive touchscreens. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Fabric Content: Back of hand: 82% Nylon, 18% PU; Palm: 80% Polyester, 20% Spandex - Lightweight and highly breathable back of hand fabric keeps things cool. - Perforated palm is micro-vented for sublime breathability. - Power knit mesh between your fingers allows for maximum air flow.

Our new Trail Gloves are sure to be your go-to for the perfect, everyday mountain glove. They feature silicone-printed fingers for grip and brake lever control, an AX Suede palm for durability and bar feel, and fabrics that deliver the perfect blend of comfort and durability. - Ax Suede palm provides durability without sacrificing bar-feel. - Brushed tricot thumb wipe for sweat. - Compatible with conductive touchscreens. - Durable, light-compression, stretch nylon at the back of hand delivers durability and tremendous comfort over a wide range of trail conditions. - Fabric Content: Back of hand: 95% Nylon, 5% PU; Palm: 80% Polyester, 20% PU Ax Suede - Silicone-printed fingers provide maximum handlebar and brake grip. - Velcro cuff provides a snug and secure fit.

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Our Trail Shield Gloves are the most-padded in our new line. These gloves feature a conductive palm that keeps your hands comfortable on rough trails, but they also have a layer of foam inserted into the knuckle that adds some protection from hidden branches. - Ax Suede palm provides durability without sacrificing bar-feel. - Brushed tricot thumb wipe for sweat. - Compatible with conductive touchscreens. - Durable, light-compression, stretch nylon at the back of hand delivers durability and tremendous comfort over a wide range of trail conditions. - Fabric Content: Back of hand: 95% Nylon, 5% PU; Palm: 80% Polyester, 20% PU Ax Suede - Silicone-printed fingers provide maximum handlebar and brake grip. - TPU-printed knuckles provide protection and durability for epic trail days. - Velcro cuff provides a snug and secure fit.

Our Women's Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Perforated palm is micro-vented for sublime breathability. - Lightweight and highly breathable back of hand fabric keeps things cool. - Power knit mesh between your fingers allows for maximum air flow. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Compatible with conductive touchscreens.

Our Trail Gloves are sure to be your go-to for the perfect, everyday mountain glove. They feature silicone-printed fingers for grip and brake lever control, an AX Suede palm for durability and bar feel, and fabrics that deliver the perfect blend of comfort and durability. - Ax Suede palm provides durability without sacrificing bar-feel. - Silicone-printed fingers provide maximum handlebar and brake grip. - Brushed tricot thumb wipe for sweat. - Durable, light-compression, stretch nylon at the back of hand delivers durability and tremendous comfort over a wide range of trail conditions. - Velcro cuff provides a snug and secure fit. - Compatible with conductive touchscreens.

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Our new Trail Shield Gloves are the most-padded in our new line. These gloves feature a conductive palm that keeps your hands comfortable on rough trails, but they also have a layer of foam inserted into the knuckle that adds some protection from hidden branches. - Ax Suede palm provides durability without sacrificing bar-feel. - Brushed tricot thumb wipe for sweat. - Compatible with conductive touchscreens. - Durable, light-compression, stretch nylon at the back of hand delivers durability and tremendous comfort over a wide range of trail conditions. - Fabric Content: Back of hand: 95% Nylon, 5% PU; Palm: 80% Polyester, 20% PU Ax Suede - Silicone-printed fingers provide maximum handlebar and brake grip. - TPU-printed knuckles provide protection and durability for epic trail days. - Velcro cuff provides a snug and secure fit.

Our Limited Prey Collection brings out your wild side with a graphic that's sure to turn heads. The Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Perforated palm is micro-vented for sublime breathability. - Lightweight and highly breathable back of hand fabric keeps things cool. - Power knit mesh between your fingers allows for maximum air flow. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Compatible with conductive touchscreens.

Our Trail D3O Gloves feature added D3O knuckle protection for those pesky trail obstacles. Pair that with silicone-printed fingers for grip and brake lever control, an AX Suede palm for durability and bar feel, and added ventilation for hot spots and you're left with a protective trail glove that gives nothing up to control or breathability. - D3O protective foam is strategically sewn into Nylon fabric for added finger protection. - Silicone-printed fingers provide maximum handlebar and brake grip. - Ax Suede palm provides durability without sacrificing bar-feel. - Laser-perforated palm aids in breathability and ventilation for the hottest spots on your hands. - Brushed tricot thumb wipe for sweat. - Adjustable, debossed neoprene cuff closure makes for a snug fit around your wrist, keeping unwanted debris from sneaking into your gloves. - Compatible with conductive touchscreens.

Our Trail D3O Gloves feature added D3O knuckle protection for those pesky trail obstacles. Pair that with silicone-printed fingers for grip and brake lever control, an AX Suede palm for durability and bar feel, and added ventilation for hot spots and you're left with a protective trail glove that gives nothing up to control or breathability. - D3O protective foam is strategically sewn into Nylon fabric for added knuckle protection. - Silicone-printed fingers provide maximum handlebar and brake grip. - Ax Suede palm provides durability without sacrificing bar-feel. - Laser-perforated palm aids in breathability and ventilation for the hottest spots on your hands. - Brushed tricot thumb wipe for sweat. - Adjustable, debossed neoprene cuff closure makes for a snug fit around your wrist, keeping unwanted debris from sneaking into your gloves. - Compatible with conductive touchscreens.

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

Mountain Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider, designed to have just as much performance when hiking as it does when riding. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. Approximate weight: 386.5 grams.

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Now with a full hyper-visibility color treatment that increases your visibility to motorists around the clock, our Body Geometry Grail Long Finger Gloves are ergonomically designed and scientifically tested for the best possible fit and protection. Featuring an exclusive pad system designed by Dr. Kyle Bickel M.D., they're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, and our acclaimed Equalizer gel padding at the palm. - Hyper Green and Black artwork is paired with Reflective elements to help increase visibility to motorists 24-hours a day - Clarino synthetic leather palm provides durability without sacrificing bar-feel - Body Geometry Equalizer pad was developed by Dr. Kyle Bickel M.D. to fill the recesses of the palm in order to create an even surface over the hand. This comes with the positive result of unrestricted blood flow, which will greatly reduce numbness and tremendously enhance overall comfort. - Breathable mesh upper is soft, comfortable, and made from high-stretch materials - Compatible with conductive touchscreens - Soft and absorbent Microwipe thumb brushes away sweat with ease - Tapered, slip-on cuff gives you a clean, sharp, and minimalistic construction for unrestricted comfort

Perfect for your cruiser or urban commuter, The Cup is an extra-wide, supportive saddle that cradles your sit bones while you ride to provide comfort mile after mile. Couple that with super-supple honeycomb gel padding, and you get a Body Geometry saddle that’s ready to help you lift your fitness game, stay active, or take the scenic route on ‘round town errands. - Body Geometry V-groove design improves comfort and increases blood flow in critical areas - Extra-wide, ergonomic design for upright, relaxed comfort - Honeycomb gel padding to cradle your sitbones - Elastomer rail suspension for instant, plush comfort - Tough, lightweight, water-resistant Micromatrix cover - SWAT-compatible mounts allow for sleek and integrated storage solutions - Level 6 padding: Ideal for commuting and casual riding

Our new Trail Air Gloves have been designed for maximum ventilation. With a micro-vented, perforated palm, a lightweight breathable back of hand, and power knit mesh between your fingers, these gloves are ready for even the hottest trail days. - Compatible with conductive touchscreens. - Embossed neoprene cuff features small perforations for wrist closures that are clean, comfortable, and secure. - Fabric Content: Back of hand: 82% Nylon, 18% PU; Palm: 80% Polyester, 20% Spandex - Lightweight and highly breathable back-of-hand fabric keeps things cool. - Perforated palm is micro-vented for sublime breathability. - Power knit mesh between your fingers allows for maximum air flow.